Graf KLARO Easy Notice D'installation page 68

7. Assembling the exterior switch cabinet
Before installation a strip or solid foun-
dation must be prepared.
250 mm
When the foundation is being cast,
the drawn dimensions must be
adhered to, particularly the position
of the hole through which the hos-
es will be led later.
There are four M10 holes in the
cabinet base. These holes must be
continued in the concrete founda-
M10 holes
tion below.
Insert the M10 dowels into the
holes. Securing the switch cabinet
with the aid of the four M8 bolts
(together with washers).
67 / 148