Installation And Assembly - Graf KLARO Easy Notice D'installation

6.3

Installation and assembly

Assembly material bag content
1 Plastic dowels
2 Washer, rubber
3 Washer, steel
4 Hanger bolt M8x10
5 Washer, steel
6 Toothed lock washer
7 Nut M8
8 Screw M4x20 as child safety
lock for the cover
The PP cabinet is mounted using 4 hanger bolts
washers, toothed lock washers and nuts as illustrated in the above figure.
When mounted, secure the cover using the M4x20 screw. A second screw is included for replacement.
6.4 Assembling the steel cabinet
Technical data
Protection class: IP44
Material: Sheet steel 1.5 mm,
powder coated
Colour: RAL 7032
Dimensions W x H x D [n mm]:
500 x 500 x 300 (interior cabinet 1)
600 x 600 x 330 (interior cabinet 2)
800 x 675 x 500 (interior cabinet 3)
6. Assembling the interior switch cabinet
①
②
③
Required tools
Drill M10
13 mm open-end wrench
Bit TX25 for hanger bolt
Bit H2 for cabinet cover
and plastic dowels
③ ①
H
B
57 / 148
④
⑤
⑥
⑦
fixed in the wall. Assemble the
T