Hints For Use - Princess Easy Fryer 3L Mode D'emploi

Use
Switching on and off (fig. A)
The appliance is equipped with a thermostat
that keeps the oil or the liquid fat at the
required temperature.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the appliance when the
removable pan is not filled with oil or liquid
fat.
• Insert the mains plug into the wall socket.
The power indicator (2) comes on.
• To switch on the appliance, turn the
thermostat dial (1) to set the required
temperature. The temperature indicator
(3) remains on while the thermostat heats
the oil or the liquid fat. The temperature
indicator (3) goes off when the oil or the
liquid fat has reached the required
temperature.
• While the appliance is switched on, the
temperature indicator (3) will illuminate
and extinguish as the thermostat switches
on and off to maintain the required
temperature.
• To switch off the appliance, turn the
thermostat dial (1) to the off position.
Make sure that the dots on the thermostat
dial (1) and the electronic control unit (5)
are aligned. The temperature indicator (3)
goes off.
• Remove the mains plug from the wall
socket. The power indicator (2) goes off.
Setting the temperature (fig. A)
The temperature can be adjusted from 160 °C
to 190 °C.
• Turn the thermostat dial (1) to set the
temperature. The temperature indicator
(3) goes off when the oil or the liquid fat
has reached the required temperature.
Deep-frying temperature
Food
Chips (pre-frying)
Chips (final frying)
Parmesan fondue
Cheese croquettes
Potato croquettes
Meat croquettes
Fish croquettes
Fish
Fish fingers
Cheese fritters
Prawn fritters
Minced-meat hot dogs
Chicken
For the best fresh chips, it is recommended to
proceed as follows:
- Deep-fry the chips at 170 °C for 5-10
minutes. Shake the basket to loosen the
chips. Allow the chips to cool down in
a bowl for a short period.
- Deep-fry the chips at 175 °C for 2-4
minutes. Shake the basket to loosen the
chips. Allow the chips to cool down in
a bowl for a short period.
Resetting the appliance (fig. C)
If the appliance does not function properly or
if an error occurs, the appliance can be reset.
• Press the reset button (4) on the electronic
control unit (5) to reset the appliance.
Use the reset stick (11).

Hints for use

• Place the appliance on a stable and flat
surface.
• Assemble the appliance. Refer to the
section "Assembly".
• Fill the removable pan with oil or liquid fat.
Make sure that the oil/liquid fat level is
between the minimum mark and the
maximum mark on the removable pan
(fig. B).
• Insert the mains plug into the wall socket.
The power indicator comes on.
• Set the required temperature. Consult the
food packaging for the required
temperature and the required time.
The temperature indicator goes off when
the oil or the liquid fat has reached the
Temperature (°C) required temperature.
• Allow the appliance to pre-heat for
170
approximately 15 minutes with the oil or
175
liquid fat at the required temperature.
170
10
170
175
175
175
170
180
180
180
180
170