Fm Settings Menu; Rds Broadcast Reception; Rds Button O; Mono Button O - Rotel RT-1570 Manuel De L'utilisateur

English

FM Settings Menu

Press the FM - N button and toggle to the FM settings Menu. There are
3 sub-menus under FM setting.
• Scan Settings: Select between ALL STATION or STRONG STATIONS ONLY.
• Audio Settings: Select "Stereo or Mono" or "Mono only".
• FM Preset: Displays all 30 of the FM preset stations and allows tuning to
the selected preset by pressing the PUSH SELECT
or the ENT key on the remote control.
To make changes in the FM settings menu, turn the PUSH SELECT knob
on the front panel or the up/down arrow keys on the remote control. To
save a change, press the PUSH SELECT knob
ENT key on the remote control.

RDS Broadcast Reception

This Rotel unit is equipped with RDS (Radio Data Systems) reception
capabilities. The RDS broadcast system provides additional functionality
to FM radio reception by transmitting encoded information along with the
radio signal. This signal is decoded by an RDS receiver and can provide
a range of informational features including:
1. A display of the station's identifying name (e.g. BBC1).
2. A display of the station's program content (e.g. ROCK or NEWS).
3. Traffic information broadcasts.
4. A scrolling text display for announcements or information.
5. Current time and date.
RDS broadcasting has been widely available in many European markets
for years. There are a large number of RDS stations and most users will be
familiar with the features and operation.
NOTE: The RDS features are entirely dependent on the broadcaster
sending properly encoded signals. Thus, they will only be available in
markets where RDS is currently implemented and where stations are
broadcasting these data signals.

RDS Button O

The RDS button on the remote control can step through the various displays.
Press the RDS button on the remote control to step through the following
displays.
1. Radio Text.
2. Name of station.
3. PTY.
4. Today's date and current time.

MONO Button O

The MONO button on the remote control changes the FM mode from stereo
reception to mono reception. In stereo mode, a stereo signal will be heard
if the station is broadcasting a stereo signal and there is sufficient signal
strength.
8 on the front panel
8
8 on the front panel or the
NOTE: Switching to mono mode can be a useful way to improve the
reception of weak or distant FM signals. Less signal strength is required
for clean mono reception than for stereo reception.

DAB and DAB+ RADIO

NOTE: Make sure that your local area can receive Digital Audio
Broadcast (DAB or DAB+) broadcasting signal.
Press the DAB - button on the front of the panel, or remote
DAB channels are categorized into ensembles, which are also known as
multiplexes. Each multiplex provides a number of stations and each service
contains a primary service that can contain secondary services. DAB
technology allows broadcasters to transmit additional data along with the
audio, which can include other audio channels, text and even images and
computer data in the future.

DAB Radio Station Playing

1. Select DAB Button from the front panel and the unit will scan for available
stations. After scanning you will see the following menu.
<Station list>
Local Scan
Press the PUSH SELECT knob 8
remote control to see available stations.

Storing a DAB station in a preset

While a DAB station is playing, push the memory button
the number of preset assigned from numeric pad
DAB radio stations may be stored.

Playing a preset DAB station

When a DAB station is playing, you can switch to a preset station in one
of the following ways.
1. From the numeric pad 2 H
2. Press SKIP +/- = button on the front panel or PRESET +/-
remote control to display preset numbers and corresponding station. Turn
the PUSH SELECT knob 8 on the front panel or use the up/down arrow
keys on the remote control to choose the desired station, then press the PUSH
SELECT knob 8 on the front panel or the ENT key on the remote control.

DAB Settings Menu

Press the DAB - N on the front panel or remote control to toggle to the DAB
settings Menu. Turn the PUSH SELECT knob
up/down arrow keys on the remote control to go through each sub-menu.
• <Station List>: Shows stations list.
• <Local Scan>: Start a limited scan of available stations by pressing the
PUSH SELECT knob 8 on the front panel or the ENT key on the remote
control. (Not available in all markets.)
• <Full Scan>: Start a full range scan by pressing the PUSH SELECT knob
8 on the front panel or the ENT key on the remote control.
on the front panel or the ENT key on the
0 I
. Up to 30 preset
2 H
, press preset number of the desired station.
8 on the front panel or use the
15
.
N
, then press
on the
K