Set Time/Date; Upnp; Wifi Strength; Setup Menu - Rotel RT-1570 Manuel De L'utilisateur

English

Set Time/Date

To change the time and date settings, press the PUSH SELECT knob
the front control or the ENT key on the remote control, then turn the PUSH
SELECT knob 8 on the front panel or the ENT key on the remote control
to change the value. When the display shows the proper value, press the
PUSH SELECT knob 8 on the front panel or the ENT key on the remote
control to confirm this value and move to the next field. Continue this until
all values have been changed.

UPnP

The default name for the RT-1570 is Rotel Gateway. In most cases this will
not need to be changed. However if you wish to change the UPnP name
for the RT-1570 that is displayed in UPnP media players, press the PUSH
SELECT knob 8 on the front panel or the ENT key on the remote control.
Select the characters for the new UPnP Gateway name by turning the PUSH
SELECT knob 8 on the front control or using the up/down arrow keys on
the remote control. Press the PUSH SELECT knob
the ENT key on the remote control to confirm and move to the next character.
When the name has been entered, select "END" or push the REPLY button.
DEVICE NAME
<~ END<-- --> A aBbCcD>
DEVICE

WiFi Strength

Shows a percentage to indicate the WiFi strength. This tool is useful to identify
the best location for the RT-1570 to ensure proper network communication.
Configure "My Stuff"
You can personalize your RT-1570 using the www.rotelradio.com website. To
use the website you will need to first create a user account. A user account
can be created by visiting the website and entering the Registration Code
from your RT-1570. This code can be found under the Network -> Settings
-> Registration menu. Enter this number in the website, click "submit" and
follow the registration process.
The www.rotelradio.com website allows you to easily search for Internet radio
stations and add them to the My Stuff folder under the RT-1570 Network
menu. This website also includes many other features for Internet Radio
streaming from popular music services. To learn more about the available
services log into the www.rotelradio.com website and click the "Manage
My Stuff" and "See Extra Features" links.

Setup Menu

To enter the setup menu, press the SETUP
and you will see the following display to configure additional settings:
< POWER OPTION >
DIMMER
POWER LED DIMMER
FACTORY DEFAULT
8 on
8 on the front panel or
button on the remote control
C
• POWER OPTION: Select between NORMAL or QUICK. In NORMAL mode,
the network connection is turned OFF when the unit is in STANDBY. This
consumes less power in STANDBY mode. Setting this to QUICK leaves
the network connection active during STANDBY mode. Use QUICK mode
if you are controlling the unit using the Rotel control App or through the
Rotel Link t sockets.
• DIMMER: Controls the brightness of the front panel display. Press the left/
right arrow keys on the remote control to change the display brightness.
NOTE: This setting is stored permanently even after the RT-1570 is
powered off.
To temporarily change the display brightness, press the DIM
the remote control.
• FACTORY DEFAULT: Sets the unit into the original state as when it left the
factory. Presets and network configurations will be lost, and sets the IR
remote to receive codeset 1 (see below).
Factory Defaults can be restored for the main RT-1570 or for the Internet
module. Select the desired option and select "YES" to restore defaults.
• VERSION: Shows the current software version loaded into the main
controller of the RT-1570. This software version is different than the
software loaded in the Internet Radio module.
• ANTENNA SELECT: Choose AUTO(default), FM or DAB antenna. Choosing
FM uses only the FM antenna connection for radio reception. DAB uses
only the DAB antenna connection for radio reception. Auto uses both
the the FM and DAB antenna connections for their own radio reception.
• EXIT: Exits the setup menu. Or push the SETUP
control at anytime to EXIT.

Remote Unit Advanced Buttons

Changing IR Codes
The factory setting for the remote control and RT-1570 is remote codeset 1.
If you find that the remote is conflicting with other products, you can change
to remote codeset 2 with the following steps:
1. While pointing the remote at the unit, press and release the "FM"
button on the remote control. Then press and hold the "2"
seconds. The RT-1570 will show "Audio Custom Code 1--> 2". The unit is
now changed to Audio remote codeset 2.
2. You must now change the remote to output codeset 2. To do this, press
"FM" and "2" at the same time for 2 seconds, then release both keys.
N H
3. Repeat the above procedure and press "1" key instead of "2" to change
the unit back to Codeset 1.
Second CD Code
The factory setting is CD codeset 1, but the transport buttons
pause) used in Network mode may conflict with Rotel CD players in your
system. You can change the CD codes by following the steps below:
17
button on
F
button on the remote
C
N
button for 10
H
(play, stop
J