Rinsing Cycle - Philips 2000 Série Mode D'emploi

English
24
3 Turn the control dial back to the coffee bean icon. Wait
approximately 1 minute to let the descaling solution act.
4 Press the espresso button to brew a cup of espresso. Wait
approximately 1 minute to let the descaling solution act.
Note: During the descaling process, the coffee grinding function
does not work.If you press the espresso button, only water will flow
out of the machine.
5 Repeat steps to until the 'water tank empty' light lights up
continuously.

Rinsing cycle

1 Remove the water tank from the machine and rinse it.
2 Fill the water tank with fresh tap water up to the MAX indication
and slide the water tank back into the machine.
3 Empty the big cup and place it back onto the drip tray under the
hot water/steam wand.
4 Press the espresso button and brew a cup of espresso. Repeat this
twice.
5 Turn the control dial to the hot water icon.
6 Let hot water flow out of the hot water/steam wand until the 'water
tank empty' light lights up continuously.
Note: If you want to interrupt the water flow, turn the control dial
back to the coffee bean icon. To restart the water flow, turn it back
to the hot water icon.