Hot Water - Philips 2000 Série Mode D'emploi

English
16

Hot water

5 Immerse the hot water/steam wand or classic milk frother in the
milk and turn the control dial to the steam icon. Froth the milk by
gently swirling the jug and moving it up and down.
6 When the milk froth has the desired consistency, turn the control
dial back to the coffee bean icon.
After frothing milk, the machine needs to cool down before you can
brew coffee. Follow the next steps.
1 Press the espresso button or regular coffee button.
The on/off button flashes rapidly to indicate that the machine is
overheated and cannot brew coffee.
2 Place a bowl under the hot water/steam wand or classic milk
frother and turn the control dial to the hot water icon.
3 Hot water comes out of the hot water/steam wand or classic milk
frother.
4 Wait until the water flow stops and the on/off button lights up
continuously.
5 Turn the control dial back to the coffee bean icon.
The machine is ready to brew coffee.
1 Make sure the on/off button lights up continuously.
If the on/off button flashes slowly, the machine is heating up.
2 Place a cup under the hot water/steam wand or classic milk frother.
3 Turn the control dial to the hot water icon.
- Water comes out of the hot water/steam wand or classic milk
frother.