Installing the machine
15cm
15cm
15cm
15cm
15cm
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the
sink and heat sources.
3 Leave at least 15cm of free space above, behind and on both sides
of the machine.
4 Insert the small plug into the socket located on the back of the
machine.
5 Insert the plug into the wall socket.
6 Remove the protective sticker from the drip tray and slide the drip
tray into the guiding grooves in the front of the machine.
Note: Make sure the drip tray is fully inserted.
English
9