Preparation; Descaling Cycle - Philips 2000 Série Mode D'emploi

Preparation

1 Switch off the machine.
Note: If you do not switch off the machine, you cannot enter the
descaling
2 Empty the drip tray and place it back. Remove the classic milk
frother (if present).
3 Empty the water tank and remove the Intenza+ water filter (if
present). Pour the entire bottle of descaling solution into the water
tank.
4 Add water to the descaling solution in the water tank up to the
MAX indication.
5 Make sure the control dial is set to the coffee bean icon.
6 Place a big cup under the hot water/steam wand.

Descaling cycle

1 Press the espresso button and regular coffee button
simultaneously for approximately 5 seconds.
The orange descaling light flashes slowly during the entire
descaling cycle.
5 sec
2 Turn the control dial to the hot water icon and brew hot water. Let
hot water flow out of the hot water/steam wand for 10 seconds.
English
23