General Characteristics; Environment; Environmental Conditions For Use; Accessories - HT FLASHMETER F100 Mode D'emploi

7.2.

GENERAL CHARACTERISTICS

Reference guidelines
Safety:
EMC:
Insulation:
Pollution level:
Measurement category:
Mechanical characteristics
Dimensions instrument (L x W x H):
Dimensions clamp (L x W x H):
Max cable diameter:
Length cable of clamp:
Weight (battery included):
Mechanical protection:
Power supply
Battery type:
Low battery indication:
Battery life:
Auto Power OFF:
Display
Characteristics:
Out-of-range indication:
Sampling frequency:
Conversion:
7.3.

ENVIRONMENT

7.3.1. Environmental conditions for use

Reference temperature:
Operating temperature:
Allowable relative humidity:
Storage temperature:
Storage humidity:
Max operating altitude:
Falling test:
This instrument satisfies the requirements of Low Voltage Directive 2014/35/EU
This instrument satisfies the requirements of European Directive 2011/65/EU (RoHS)
7.4.

ACCESSORIES

7.4.1. Standard accessories

 Pair of leads
 F100 external clamp
 Batteries
 Carrying case
 User manual
IEC/EN61010-1
IEC/EN61326-1
double insulation
2
CAT IV 600V (voltage), CAT III 600V (current)
140 x 80 x 45mm (6 x 3 x 2in)
150 x 35 x 25mm (6 x 1 x 1in)
10mm (1in)
1m (3ft)
325g (11 ounces)
IP67
2x 1.5V batteries type AAA IEC LR03
symbol
approx. 50h (backlight ON), approx. 150h
(backlight OFF)
after approx. 15 minutes' idling (not disable)
4-digit LCD, 4000 dots, decimal sign and point
with backlight
"
3times/s
TRMS
18°C  28°C (64°F  82°F)
0°C ÷ 50°C (32°F  122°F)
<75%RH
-20°C ÷ 60°C (-4°F  140°F)
<80%RH
2000m (6562ft)
2m (7ft)
(LVD) and of EMC Directive 2014/30/EU
and 2012/19/EU (WEEE)
EN - 15
on the display
" "
OL. symbol on the display
"
FLASHMETERPRO