List Of Pictograms Used; Introduction; Intended Use - LIVARNO LUX LED MOOD LIGHT Mode D'emploi

Introduction

List of Pictograms Used

Read the instructions!
This light is only suitable for indoor
use in dry and enclosed spaces.
This product is an illuminated decoration.
Do not use this light for room lighting or
as a night light.
This is a specialist product, as the
colour value amounts are beyond the
ranges listed in the brackets.
Colour value amounts: (x<0.270 or
x > 0.530); (y<-2.172 x² or y
>-2.3172 x² + 2.3653 x -0.1595).
Volt (AC)
Hertz (frequency)
Watt (effective power)
Protection class II
Direct current
LED mood light
Introduction
Congratulations on the purchase of your
new product. You have selected a high
quality product. These instructions are
part of the product and contain important informa-
tion on setup and handling. Always follow all safety
instructions. Before using this product for the first time
verify the correct voltage and that all parts are
properly installed. Should you have any questions
or you are unsure about operating the product, please
contact the dealer or service centre. Please keep
6 GB/IE/NI
Observe the warnings and safety
notices!
Danger to life and risk of accidents
for infants and children!
Electric shock warning!
Danger to life!
Caution!
Danger of explosion!
Wear safety gloves!
Dispose of the packaging and
device in an environmentally friendly
manner!
b
a
Operating life
Switching cycles
ON OFF
these instructions in a safe place and pass them on
third parties as applicable.

Intended Use

This light is suited for use in dry in-
door spaces and must not be used
outside. Alternating calming and
reviving colours create an overall feeling of
well-being. This product is not intended for
commercial use.
This product is an illuminated deco-
ration. Do not use this light for room
lighting or as a night light.