Installation
To the side walls
18
English
DW60R2014(A5)_IM_DD81-02707A-00_EN.indd 18
Ø2
3/16"
(5 mm)
6. Insert the provided screws into the
brackets, and then tighten to secure the
dishwasher to the countertop.
NOTE
Use a magnetic screwdriver to help prevent
screws from falling into the dishwasher.
7. Connect the water hose, but do not
open the water tap until installation is
complete.
1. Put a large towel on the bottom of
the dishwasher (covering the sump) to
prevent wood shavings or screws from
falling into the dishwasher sump.
2. To prevent damage to the drain hose
through the water supply line, slightly
pull out the dishwasher and bend the
built-in ear brackets of the left and right
housings by 3/16" (5 mm). When done,
reinsert the dishwasher with its center
aligned.
2019-02-20
3:00:31