Samsung DW60R2014US Mode D'emploi page 13

STEP 4 Install the custom panel (FBI models only (DW60R2014AP))
Ø2
B
C
DW60R2014(A5)_IM_DD81-02707A-00_EN.indd 13
1. Put the installation template on the
• The top end of the custom panel must
• Use a custom panel between 7 lbs and
2. Pre-drill the 14 points marked on the
3. Remove the installation template and
B
C
back of the custom panel and fix it
temporarily using transparent tape. Note
that the rear of the custom panel will be
attached to the dishwasher door.
CAUTION
be aligned with the top end of the
installation template.
18 lbs.
installation template using a 2-pi drill bit
to a depth of ~ 8 mm.
tighten the custom panel fixers (B) at
the top with 2 screws (C, Ø3.5 X 25) as
shown.
English English 13
2019-02-20 3:00:29