Monitor Setup - switel BCF4161 Mode D'emploi

1
Night vision
.5
The camera has nine high-intensity LEDs for picking up clear images in the dark.
When the built-in photo sensor detects low ambient light levels, the LEDs will
automatically activate.
2

Monitor Setup

2
.1
Power Supply
The monitor uses 3.7V 1000mAH (Li-ion) battery or the household AC power
current.
Loading the Battery
1.Open the battery compartment cover on the rear of the monitor. See Fig. 8.
2.Insert the battery with the metal facing the battery compartment. See Fig 8.
3.Close the battery compartment cover, and make sure it is locked securely.
4.Turn the monitor on. See Fig 8.
Note 1: When power is sufficient, the light is red ; When battery is low,
Note 2: Remove the battery from the monitor if you do not plan to use it for a
prolonged period of time.
5.Adjust the volume to a comfortable level.
Using AC Power
1.Plug one end of the provided power adapter into a wall outlet and the other end
into the bottom of the monitor. See Fig. 9.
Note: Use the adapter labeled OUTPUT: 6V DC with the monitor.
2.Turn the monitor on. See Fig. 9.
3.Adjust the volume to a comfortable level.
Note 1: When charging starts, and "Power" LED will appear blue .
If charging is finished (fully charged), the "Power" LED will turn red.
Note 2: When the camera and the monitor is linked, the "Link" LED will
become green; otherwise, the "Link" LED will become red and blinking.
Note 3: "OUT OF RANGE" would be displayed on the LCD screen if the monitor
is exceeds the range (unlink). See Fig. 10.
2
.2
Brightness Setting
Press the Brightness selection button
the LED light will start blinking.
& to adjust brightness. See Fig. 11.
3