Camera Setup; Monitor Setup - switel BCF989 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setup
1

Camera Setup

1
P
ower Supply - Using AC Power
.1
1. Plug one end of the provided power adapter into a wall outlet and the other
end into the back of the camera. See Fig. 3.
Note : Use the adapter labeled OUTPUT: 5V DC with the camera.
2. Press the POWER button
camera. The LED on the camera will light up (green light). See Fig. 3.
Note : Press the POWER button and keep it around 3 seconds to turn off
the camera.
1
.2
Fine Tuning
Place the camera in a convenient location, point the lens toward the observation
area.
1
Night Vision
.3
The camera has eight high-intensity LEDs for picking up clear images in the
dark. When the light sensor detects low ambient light levels, the LEDs will be
automatically activated.
1
.4
Room Temperature Measurement
Temperature sensor can measure room temperature on camera side and the room
temperature indicator will be displayed on the screen of the monitor unit.
2

Monitor Setup

2
.1
Power Supply - Using AC Power
The monitor has built in 3.7V 2200mAh (Li-ion) battery and uses household AC
power current.
1. Plug one end of the provided power adapter into a wall outlet and the other end
into the monitor. See Fig. 4.
Note : Use the adapter labeled OUTPUT: 5V DC with the monitor.
2. Slide the Power switch to "ON". See Fig. 4.
Note 1: When power on the monitor, "Power" LED will light up (green light).
Note 2: "Out of Range" will be displayed on the LCD screen if the monitor
2
When battery is low, the red LED light will start blinking.
When the battery is charging, the orange LED will light up.
exceeds the range (unlink).
and keep it around 3 seconds to turn on the

Publicité

Table des Matières
loading

Table des Matières