Use And Operation - Klarstein 10030085 Mode D'emploi

Use and Operation

Before first Use
• Check the voltage of the unit corresponding to your mains supply meter accordingly.
• Wash the parts of the unit, which will contact with foods.
• Try to assemble and disassemble the unit for a few times before starting to the units.
Dismantling and Assemble
1. Touch control panel " OFF " .
2. Remove the glass jug assembly .
3. Remove the measure cup , then the lid cover .
4. Place the glass jug Assembly onto the housing and tune it in direction until it is properly fit.
5. Insert the lid cover into the glass jug and insert the measure cup into the lid cover .
Control Panel
Important Hints on Use
• Before use: do not put the main plug in the socket until you have attached the blender jar and the housing
cap in the correct way.
• After use: unplug the appliance before you remove the blender jug from the housing.
• To prevent spilling, do not put more than MAX liters of liquid in the blender jar.
• Never remove the lid while the blender is running
Function
The blender can be used for pureeing very finely and for blending. It can be used for e.g. sauces, milk shakes,
baby food, vegetables, fruit thin batter, puree, etc. if necessary, cut solid ingredients into smaller pieces before
you put them in the blender.
Note: Pre-set programs will stop automatically and the indicator light will go out when the cycle has finished.
Alternatively press the STOP button to finish cycle. SLOW and FAST settings will stop only when the STOP
button is pressed. PULSE will stop when you take your finger off the button.
10