Technical Data; Travel Speed; Distance To The Id Tag; Separation Between Read Heads - IFM Electronic Efector 190 DTA101 Notice D'utilisation

11. Technical data

DTA101
Read head DTS/125/RO/AS/US
with integrated AS-i slave
profile 7.3
rotatable M12 connector
Application
Electrical design
Operating voltage
Current consumption
Operating frequency

Travel speed *

Distance to the ID tag *

Separation between read/read
heads
[mm]
Separation between read/write
heads**
Data provision time
Value range
Operating conditions
Protection
AS-i profile
I/O configuration
ID code
AS-i certificate
EMC
Housing material
Display
Connection
Remarks
ifm electronic gmbh • Teichstraße 4 • D-45127 Essen
1: integrated antenna , 2: tag positioning mark (middle of the antenna)
Detection of objects on conveying systems;
[V]
[mA]
[kHz]
[m/s]
[mm]
[mm]
[ms]
[Hex]
[Hex]
*) referred to the ID tag E80301 (middle of the screw)
For the distances to other ID tags see the respective data sheet (E803xx)
**) referred to the read/write head DTA100
We reserve the right to make technical alterations without prior notice .
READ HEAD FOR RF IDENTICFICATION SYSTEMS
suitable for travel speeds up to 0.5 m/s
AS-i
26.5...31.6 DC (AS-i)
50
125
0.5
15 (at 0.5 m/s); 20 (static)
200 (at 0.5 m/s)
400 (at 0.5 m/s)
70
16 bits (15-bit ID value, 1-bit message)
operating temperature: -20...50 °C
storage temperature: -25....80 °C
vibration: 20 g; 10...2000 Hz
shock: 50 g; 11 ms
IP 67, III
7.3
7
3
71502
EN 50295 (1999-03)
PA (polyamide)
3 LED
green: operating voltage
yellow: tag read
red: error AS-i data communication
M12 connector
DTA101
GB - DTA101 17.03.2006
17