Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.2
Vital Information
This manual is a guide for the setup and operation of the nVent RAYCHEM Elexant 9200i Wireless
Communications product.
IMPORTANT: All information, including illustrations, is believed to be reliable. Users, however, should
independently evaluate the suitability of each product for their particular application.
nVent Thermal LLC makes no warranties as to the accuracy or completeness of the information and disclaims
any liability regarding its use.
nVent Thermal LLC's only obligations are those in the nVent Thermal Standard Terms and Conditions of Sale
for this product, and in no case will nVent Thermal or its distributors be liable for any incidental, indirect, or
consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject
to change without notice. In addition, nVent Thermal reserves the right to make changes—without notification to
Buyer—to processing or materials that do not affect compliance with any applicable specification.
1.3
Technical Support
Contact nVent Customer Care at:
North America:
Email: thermal.info@nVent.com
Tel: +1.800.545.6258
Europe, Middle East, Africa:
Email: thermal.info@nVent.com
Tel: +32.16.213.511
Asia Pacifc:
Email: cn.thermal.info@nVent.com
Tel: +86.21.2412.1688
Latin America:
Email: thermal.info@nVent.com
Tel: +1.713.868.4800
1.4
Supporting Services
A commissioning program for the Elexant 9200i has been developed in order to simplify and streamline all
related activities – Programming, Equipment Tracking, Progress Tracking, QA/QC, etc. Please speak to your
nVent representative for assistance with this program.
2. INSTALLATION AND WIRING
2.1
Initial Inspection
Inspect the shipping container for damage. If the shipping container or cushioning material is damaged, it should
be kept until the contents of the shipment have been verified for completeness and the equipment has been
checked mechanically and electrically. If the shipment is incomplete or shows visible damage, notify the nearest
nVent Thermal representative.
2.2
Operator Safety Considerations
The Elexant 9200i Wireless Communications products are suitable for Class 1, Division 2, Groups A, B, C, and D
hazardous areas (IECEx / ATEX Zone 2 approvals pending).
Refer to RAYCHEM-IM-H60818-Elexant9200i-EN Installation Manual for more details.
RAYCHEM-AR-H60819-Elexant9200i-ML-2009
|
nVent.com/RAYCHEM
6
Publicité
Chapitres
Table des Matières
Dépannage
