Overview; Introduction; Description - nVent RAYCHEM Elexant 9200i Mode D'emploi

1. OVERVIEW

This section contains an overview of the Elexant 9200i Wireless Communications product. It introduces the main features of
the product, variations available, as well as provides directions on accessing manufacturer information that pertains to the
equipment there-in.
1.1

Introduction

The nVent RAYCHEM Elexant 9200i is a Wireless Communications Interface that provides an alternative solution
to hardwired Remote Monitoring and Configuration of Electric Heat Tracing Systems (EHT) systems.
This product contains equipment from 3rd party manufacturers, is regional in its application, and covers a range
of frequencies, all of which need be defined at the time of purchase. Engineering Services typically define the
equipment that is needed in order to meet a specific application.
Additional copies of this user manual may be ordered separately through your nVent Heat Tracing Solutions
representative or online at RAYCHEM.nVent.com using the document number H60819.
1.1.1
A minimum of two radio transceivers are required to establish a network. This product is intended for integration
with nVent RAYCHEM Supervisor software and nVent RAYCHEM Electric Heat Tracing (EHT) Controllers.
The Elexant 9200i product line consists of the following:
•
•
•
Standalone enclosures can be configured in many ways, enabling the customer to choose from a range of
options: enclosure material, radio frequency, antenna type, and heating option.
RAYCHEM-AR-H60819-Elexant9200i-ML-2009

Description

Standalone enclosures
A wireless communications option within a given Control Panel
External antenna packages
|
nVent.com/RAYCHEM 3