Mounting And Removal Procedures; Wiring And Input Interfaces; Input Power; Figure 2 - Input Power - nVent RAYCHEM Elexant 9200i Mode D'emploi

2.4 GHz Radio Levels
LED Bar Graph
nVent RAYCHEM Elexant 9200i RM RSSI LED 1G
nVent RAYCHEM Elexant 9200i RM RSSI LED 1G
nVent RAYCHEM Elexant 9200i RM RSSI LED 1G
nVent RAYCHEM Elexant 9200i RM RSSI LED 1Y
nVent RAYCHEM Elexant 9200i RM RSSI LED 1W
2.5

Mounting and Removal Procedures

The ideal mounting method is to secure the enclosure to channel strut, or other structural components, using
the included mounting hardware.
Mounting and removal of the Elexant 9200i should only be attempted by trained personnel. If support is needed,
contact nVent Technical Support (refer to section 1.3).
2.6

Wiring and Input Interfaces

2.6.1
The input power connection is made at the screw terminals on Terminal Block TB-1.

Figure 2 - Input Power

RAYCHEM-AR-H60819-Elexant9200i-ML-2009
16k
–70 dBm
–80 dBm
–90 dBm
LINK
Not Connected, Configuration more, or overload

Input Power

125k 250k
–65 dBm –60 dBm
–75 dBm –70 dBm
–85 dBm –80 dBm
LINK LINK
RSSI voltage
>= 2.5 V
>= 2.0 V
>= 1.5 V
~1.0 V
0 V
|
nVent.com/RAYCHEM 10