Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting via Ad-Hoc mode
In order to use this Ad-Hoc procedure, you will need a wireless enabled PC.
Ad-Hoc mode is a direct wireless connection between your PC and the module.
Make sure your wireless network connection is enabled.
a On your PC, select: Start > Settings > Control Panel > Network Connections.
b In your "Network Connections" folder, locate your wireless card and single left
click it. Make sure it is highlighted (a).
c Select "View available wireless networks" (b).
20
Publicité
Table des Matières
