Connecting To A Wifi; Logging In By App; Download The Miele@Mobile App; Logging In By Wps - Miele XKM 3100 W Mode D'emploi

en - Connecting to a WiFi
After installing the WiFi module in the
Miele appliance, the Miele appliance
must be logged in to a local WiFi net-
work. There are two ways of doing this:

1. Logging in by app

Download the Miele@mobile app

The operating system of your mobile
device (smartphone / tablet) needs to
be at least iOS version 8
droid 4.4™.
You can get the appropriate
"Miele@mobile" app for the WiFi mod-
ule for free from the respective app
stores.
 Search in App Store
Play™ for the Miele@mobile app.
 Download the app to your mobile
device.
To log in using the app you will need:
1. A mobile device with the
Miele@mobile app installed on it
2. The name of your local WiFi network
and the password for it
3. The serial number of your Miele do-
mestic appliance (this can be found
on the data plate; see the operating
instructions for the appliance)
36
®
or An-
®
or Google
 Switch the Miele appliance on.
 Start the Miele@mobile app.
 Select add
Miele appliance
 Follow the further instructions given
by the app.

2. Logging in by WPS

A WiFi router is required with WPS sup-
port.
 Switch the Miele appliance on.
 Briefly press the button on the WiFi
module.
 The LED will begin to flash red / yel-
low / green.
 Activate the WPS function on your
WiFi router within two minutes.
The LED will light up green if the WPS
log in is successful.
Tip: For some appliances the WPS
function can be activated via the
Miele@home setting. For more informa-
tion see the appliance operating in-
structions.
Please note that the WPS log in is
only active for 2 minutes.
.