Miele RemoteVision XKM 2000 WLAN Instructions D'installation page 14

Accessing the module settings
l Click "OK". Another message may appear asking you to close the window, click
"OK" here as well.
Not all Web browsers will display a second message. If the browser does not
close automatically, please close it yourself.
– To install additional modules, repeat this process beginning with step b.
Until step m is completed you will no longer be able to access the
RemoteVision welcome page(s) of your appliance(s).
m You may now go back into your router's web page and re-apply your security
settings. After approximately 1 minute the WLAN indicator will change and you
will be connected to the module as described in the Miele Appliance Operating
Instructions.
– The installation is now complete.
n If you would like to confirm the module is connected, click on the "Send test
mail" button. A confirmation notice will appear on the screen if the email has
been successfully sent. In addition, registered RemoteVision users will receive
a confirmation email.
Your appliance can only be monitored after completing the registration
process**.
** Certain services may require a subscription. For the most up to date information go to
www.MieleRemoteVision.com.
14