Miele RemoteVision XKM 2000 WLAN Instructions D'installation page 33

To access the RemoteVision control panel, see the "Settings" section of the
appliance Operating Instructions.
MasterCool control panel options for RemoteVision
Status indicators Description of function
Flashing ; ~
Flashing ; ‡
Flashing ; |
; #
Solid
Flashing ; <
Flashing ; =
Selectable
options
; -
; 2
; 3
; 4
Note: If you cannot select any option (other than ; - "Back", the module has not
been installed correctly.
Module booting phase
Not connected to network
Connection to network established, no IP address
assigned
Connected to network
In Ad-Hoc Mode, not connected
In Ad-Hoc Mode, connected
Description of function
Back
Reboot the module
Reset to factory settings
Enter Ad-Hoc Mode
Appendix
33