Accessing The Module Settings - Miele RemoteVision XKM 2000 WLAN Instructions D'installation

Accessing the module settings

You can access the module settings in one of two ways:
– By enabling Universal Plug and Play (UPnP), or
– Manually finding the IP address of the module and typing it into the address bar
of your browser.
Once you have accessed the module settings page, you can do the following:
– Link to MieleRemoteVision.com
– Send a test e-mail to Miele
– View Appliance Information
– View System Settings
– Monitor the signal strength of the XKM 2000 as received by your wireless router
– Update the firmware on the XKM 2000 module
– Read our Privacy Policy
8