Miele RemoteVision XKM 2000 WLAN Instructions D'installation page 29

n The following message will appear.
^ Click "OK". Another message may appear asking you to close the window. Click
"OK" here as well.
The XKM 2000 module will now disconnect from the Ad-Hoc mode and attempt to
connect to your wireless network. Assuming the network settings have been
properly entered, the module should join your wireless network in approximately 1
minute.
^ You may now add additional modules to the network by repeating steps k
through n.
o Once you have all the modules configured, return to your "Network
Connections" folder as outlined beginning in step c.
^ Single click your "Wireless Network Connection" and select "Change Settings of
this Connection". The "Wireless Network Connection Properties" window will
appear.
p Double click Internet Protocol (TCP/IP).
Connecting via Ad-Hoc mode
29