ETA Systems 420VA Guide De L'utilisateur page 5

ETA Systems ® - SECURITY ONE UNINTERRUPTIBLE POWER MANAGER
CAUTION !!
THIS UPM CONTAINS VOLTAGES WHICH ARE POTENTIALLY HAZARDOUS. ALL REPAIRS
SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL.
THE UPM HAS ITS OWN INTERNAL ENERGY SOURCE (BATTERY). THE OUTPUT
RECEPTACLES OF THE UPM MAY BE LIVE EVEN WHEN THE UPM IS NOT CONNECTED TO AN
AC SUPPLY.
Safe and continuous operation of the UPM depends partially on the care taken by users.
Please observe the following precautions.
PLEASE NOTE:
Do not disassemble the UPM
Do not attempt to power the UPM from any receptacle except a properly
grounded receptacle that matches the input plug provided with the UPM.
Do not place the UPM near water or in environments of excessive humidity.
Do not allow liquid or any foreign object to get inside the UPM.
Do not block air vents on the side of the UPM.
Do not plug appliances such as hair dryers, fans, heaters, etc. into the UPM.
Do not place the UPM under direct sunshine or close to heat emitting sources
(excessively warm temperatures will shorten battery life).
This UPM is intended for installation in a temperature controlled, indoor area
free of conductive contaminants.
The AC power supply for the UPM should be conveniently near the UPM and easily accessible –
avoid extension cords or temporary power strips to power the UPM.
The total leakage current of the UPM and consumer connected equipment should not exceed 3.5
mA.
The battery should be disconnected from the UPM by unplugging at its quick connectors when
maintenance or service work inside the UPM is necessary.
Do not dispose of batteries in a fire – batteries may explode.
3