Battery Replacement; Warranty - ETA Systems 420VA Guide De L'utilisateur

ETA Systems ® - SECURITY ONE UNINTERRUPTIBLE POWER MANAGER
Please note: If you have read and understood the cautions preceding this section, you may proceed with
the following steps. Consult Figure 6 to assist you in the following battery replacement procedure.

Battery Replacement

1. Remove the two small screws from the bottom of the front panel that secure the front panel to the frame
of the UPM.
2. Carefully slide the front panel off the UPM taking care not to damage or tear the ribbon cable that
connects the front panel "dashboard" display to the UPM.
3. Remove the screw(s) that secures the battery assembly retaining bracket, remove it from the unit, and
set it to one side.
4. Slide the battery pack from the UPM by pulling on the tab provided.
5. Disconnect the battery from the UPM by pulling apart the wire leads at the connector(s) provided.
6. Connect the new battery pack to the UPM by reconnecting the connector(s) making sure to observe
proper polarity (i.e. black to black and red to red).
7. Push the new battery pack into place.
8. Replace the battery retaining bracket removed in step 3 and replace the screw(s) that secures it in
place.
9. Slide the front panel (removed in step 2) back on the front of the UPM taking care not to pinch or
damage the ribbon cable.
10. Replace the front cover screws and tighten.
9.0 – UPM WARRANTY
ETA Systems warrants its uninterruptible power managers or UPM (known hereafter as the "product") to be
free from defects in materials or workmanship for a period of five years from the date of shipment. ETA
Systems warrants the batteries used in the product to be free from defects in materials or workmanship for a
period of two years from the date of shipment. The product will be repaired or (at ETA Systems's option)
replaced at no charge during this warranty period. Product must be returned prepaid to the factory.
ETA Systems makes no warranties, expressed or implied, of merchantability, fitness for a
particular purpose, performance, condition, capacity or otherwise. ETA Systems is not liable for
incidental or consequential damages, monetary loss, loss of sales, or loss of business resulting
from the failure or malfunction of the product.
Warranty is void on any product that is misused,
17