Introduction; Safety Instructions - Topcom BPM Wrist 2300 Mode D'emploi

TOPCOM BPM WRIST 2300
1

INTRODUCTION

Congratulations with your purchase of the Topcom BPM wrist 2300. This fully
automatic, wrist mounted blood pressure monitor is both easy to use and ideally
suited for daily measurements. The large display includes systolic, diastolic and
pulse, all clearly shown at the completion of each reading.
In addition, you can store up to 30 measurements per Memory Zone, ideal for
users who want to monitor and track their blood pressure on a regular basis.
The BPM wrist 2300 is compact and portable, making it ideal for home use and
travel.
Please read this manual carefully before use. For
specific information on your own blood pressure,
contact your physician. Put the user guide away in a
safe place for future reference.
2

SAFETY INSTRUCTIONS

1. This product is for household use only. Is is not intended as a substitute
for consultation with your doctor.
2. For users diagnosed with common arrhythmia (atrial or ventricular
premature beats or atrial fibrillation), diabetes, poor circulation of blood,
kidney problems, or for users suffered from stroke, or for unconscious
users, the device might not be suitable for use. Consult your doctor in
case of any doubt.
3. The unit should not be operated by children so to avoid hazardous
situations.
4. The unit contains high-precision assemblies. Therefore, avoid extreme
temperatures, humidity, and direct sunlight. Avoid dropping or strongly
shocking the main unit, and protect it from dust.
5. Leaky batteries can damage the unit. Remove the batteries when the unit
is not used for a long time.
6. Do not press the START key when the cuff is not placed around the wrist.
7. Do not disassemble the main unit or cuff.
8. If the unit is stored in a cold place, allow it to acclimate at room
temperature before use.
9. Clean the blood pressure monitor body and the cuff carefully with a
slightly damp, soft cloth. Do not press. Do not bend the pre-formed cuff
inside out. Do not wash the cuff or use chemical cleaner on it. Never use
thinner, alcohol or petrol (gasoline) as cleaner.
10. To ensure accurate measurements, it is recommended that calibration be
completed every two years.
4