Battery Holder Installation - Napoleon HDX52NT-2 Instructions D'installation Et D'opération

36
7.3

BATTERY HOLDER INSTALLATION

A. The battery holder must be
EN
located within 8 feet of this side
of the appliance and must be
accessible for programming the
remote.
B. Install 4 AA batteries, ensure
that the positive and negative
ends correspond with those
identifi ed in the battery holder.
C. Install the battery holder into
a standard electrical switch
box. Determine an appropriate
location and install the electrical
box.
NOTE: Ensure the 3 position slider
switch is in the "REMOTE" position
(middle).
RESET/PROGRAM BUTTON (PRG)
W415-2180 / B / 08.29.18