AXOLUTE
Video Station
5.4
Connection to the pc
To transfer the configuration made with the TiAxoluteNighterAndWhiceStation software or up-
date the firmware connect to the Axolute Video Station to the PC using USB-miniUSB cable.
USB-MiniUSB
In order for the communication to occur, the Axolute Video station must be powered and not
physically configured.
Axolute Video station connected through a Usb cable is recognised by the PC as a virtual port
(VIrTUAL COM). To know the number of the COM port assigned to Axolute Video station open
the Device Manager application from "Control Panel/system/Hardware"
37