Bticino AXOLUTE 349310 Manuel D'installation page 33

IINTerCOMMUNICATINg: intercommunicating call to the Handset with address N same as the
number indicated by the icon selected. (e.g.: INTERCOMMUNICATING 4 intercommunicating
call address to the Handset with N = 4).
CAMerA: direct activation of the camera with the same address as the associated Entrance
Panel increased by a number equal to that indicated by the icon selected. (e.g. CAMERA 2
activates the camera with address P+2).
ACTIVATION: activation of the actuator with the same address as the associated Entrance
Panel increased by a number equal to that indicated by the icon selected.
(e.g. ACTIVATION 3 opening of the Entrance Panel door lock (configured with P+3) directly
without the call or activation of actuator item 346200 (configured with P+3 and MOD=5)
or activation of actuator item 346230 (configured with P+3).
CyCLe CAMerAs: cyclically activates the cameras in the system starting from the associ-
ated Entrance Panel P (just one complete cycle is performed).
Completing the Quick Configuration
After the Axolute Video Station has been configured and switched on the red "connection LED"
flashes, to indicate that the configuration must be finished.
Press any key, the Axolute Video Station display shows the language selection menu.
LANgUAge seLeCT.
LANgUAge: -eNgLIsH+
> CONfIrM
sUMMAry CONfIg.
ADDress N : 01
ADDress P : 02
MODe M : 06
> CONfIgUrATION eND
Select the language required from those of-
fered
Select CONfIrM
Press Ok to confirm the selection
The display shows a mask summarising the configuration made.
Press Ok to confirm the configuration
The display and the connection LED go out.
The Axolute Video Station is ready for normal working.
AXOLUTE
Video Station
33