Configuring The Zone Actuators - LEGRAND 674 56 Notice D'installation

4 - Switching on for the first time

4.3 - Configuring the zone actuators

This function completes the zone configuration, indicating:
•
which actuators are installed for Heating;
• which actuators are installed for Cooling;
•
which type of load the zone manages.
01:
02:
03:
01:
02:
03:
Not connected
Not connected
09:
H:
C:
94
Living room
Zone 2
Zone 3
Actuators
Heating
Heating
Cooling
Heating
Cooling
Heat. & cool.
Not connected
ON/OFF
OPEN/CLOSE
FAN–COIL 3V
NEXT
Select the zone (e.g. Living room)
Confirm by pressing
One of the following options can be selected for
each actuator in the list:
Not present on the system
Is used to manage the Heating system
Is used to manage the Cooling system
Is used to manage both the Heating system and the Cooling
system (e.g.: 2-pipe fan coil)
Confirm by pressing
The last two items of the menu can select the
type of load managed