6 - Main menu
6.5.4 - Remote control
Can enable/disable the remote control for remote management (user) and remote after-sales
service (installer) using portal. The remote management lets the user know and control the
temperature of each zone remotely. The remote after-sales service lets the installer program the
control unit and perform the system diagnostics remotely.
Summer/winter
Remote control
138
Mode
Zone state
Temperature
Date/time
State:
enabled
Disable
State:
disabled
Enable
As factory setting the remote control is enabled.
To use the Colour Touch Screen (672 83) enable the remote control. If the remote control
is disabled the control unit does not manage the "Remote" contact and does not perform
any command received from the bus.
Current profiles
Programming
Select Remote control
Confirm by pressing
The display indicates the current state: enabled
Confirm by pressing
The display indicates the new setting: disabled
Setup
Setup
Maintenance