LEGRAND 674 56 Notice D'installation page 151

6 - Main menu
Mode Zone state
6.8.2.2 - Pumps
Can complete the zone configuration, indicating which pumps must control the zone and with
how much delay.
This function can only be used if the probe is configured with the CEN configurator in
socket P.
01: Living room
02: Zone 2
03: Zone 3
Pumps
01: Heating
02: Heating
03: Cooling
Not connected
Not connected
Not connected
Heating
Cooling
Heat. & cool.
09: Not connected
H: 1
C: 0
0
NEXT
Current profiles Programming
Select the Zone (e.g.: Living room)
Confirm by pressing
One of the following options can be selected
for each actuator in the list:
Not present on the system or not managed by the zone
selected
Is used to manage the Heating system
Is used to manage the Cooling system
Is used to manage both the Heating system and the Cooling
system
Confirm by pressing
The last two items of the menu can select the
delay in activating the pump
Selects the minutes of delay
Press
Setup
to confirm
Maintenance Maintenance
151