LEGRAND 674 56 Notice D'installation page 156

6 - Main menu
6.8.2.6 - Send
Sends the actuator and pump settings to all the configured zones.
01:
02:
03:
01:
02:
03:
156
Mode Mode Zone state Zone state
Living room
Zone 2
Zone 3
Send
Living room
automatic
Zone 3
Living room
Zone 2
Zone 3
Send
Current profiles Current profiles Programming Programming
Press
The control unit sends the configuration set to
the zones in the system.
This message may be
displayed during the send
phase:
Pressing
Press
When the send is completed, it returns to the
Configure zones menu
Setup Setup
to confirm
ERROR
Verify the
probe
configuration
cancels sending the configuration
to go to the next zone
Maintenance Maintenance Maintenance Maintenance