Total Reset - LEGRAND 674 56 Notice D'installation

6 - Main menu

6.8.6 - Total reset

Can perform a Control Unit total reset. All the settings will be lost and the factory settings will be
reset (see page 89 of the manual).
Programs will be
lost. Continue?
IN PROGRESS . . .
Configure zones
160
Mode Zone state
Probe setting
System test
Mainten. code
Total reset
ATTENTION!
YES
RESET
Language
Probe setting
System test
With this operation the system configuration and all the programs run will be lost!
Current profiles Programming
Select Total reset
Press
Select YES
Press
The Reset operation takes about 30 seconds.
Press
pressed to return to the first page
Setup
to confirm
to confirm
to return to the previous page, keep
Maintenance Maintenance