LEGRAND 674 56 Notice D'installation page 158

6 - Main menu
6.8.4 - System test
Can put the System in test (the whole system OFF) to check the system. It automatically disables
all the commands (including the remote commands).
Configure zones
Exit with CLEAR
Configure zones
158
Mode Zone state
Language
Probe setting
System test
M30 : 00.10
PIC : 01.07
HW : 00.10
Language
Probe setting
System test
Current profiles Programming
Select System test
Confirm by pressing
The display indicates the Control Unit software
and hardware versions:
M30 – firmware version
PIC – firmware version SCS interface
HW – hardware version
Press
Setup
to return to the previous page
Maintenance Maintenance