Manual Control - Boneco H400 Mode D'emploi

MANUAL CONTROL

1. Briefly press the knob once to switch on the
BONECO appliance.
The appliance is always in AUTO mode when it is
switched on.
2. Adjust the output to your needs by setting the
knob to the desired level from 1 to 6. This action
exits AUTO mode (AUTO LED is off).
The selected performance level is indicated by the
number of LEDs that light up above the knob.
3. Briefly press the knob once to exit manual mode
and to reactivate AUTO mode.
4. Briefly press the knob once more to switch off the
BONECO appliance.
If you exit AUTO mode, the BONECO appliance
will continue at the selected performance
level until the water base is empty, regardless of
what the current level of humidity is.
13
en