Manual Control - Boneco H300 Manuel

MANUAL OPER ATION (CONTINUED)

MANUAL CONTROL

1. Briefly press the output regulator once to switch on the
BONECO H300.
The appliance is always in AUTO mode when it is swit-
ched on.
2. Adjust the output to your needs by setting the control
knob to the desired level from 1 to 6. This action exits
AUTO mode (AUTO LED is off).
The selected performance level is indicated by the num-
ber of LEDs that light up above the output regulator.
3. Briefly press the control knob once to exit manual
mode and to reactivate AUTO mode.
4. Briefly press the output regulator once more to switch
off the BONECO H300.
If you exit AUTO mode, the BONECO H300 will con-
tinue at the selected output level until the water tank
is empty – regardless of what the current level of
humidity is.
11
en