Cisco Systems Linksys WRT150N Mode D'emploi page 47

Wireless-N Home Router
Allowed Remote IP Address. If you want to be able to access the Router from any external IP address, select
Any IP Address. If you want to specify an external IP address or range of IP addresses, then select the second
option and complete the fields provided.
Remote Management Port. Enter the port number that will be open to outside access.
NOTE: When you are in a remote location and wish to manage the Router, enter http://<Internet IP
Address>: port or https://<Internet IP Address>: port, depending on whether you use HTTP or
HTTPS. Enter the Router's specific Internet IP address in place of <Internet IP Address>, and enter
the Administration Port number in place of the word port.
UPnP
Universal Plug and Play (UPnP) allows Windows Me and XP to automatically configure the Router for various
Internet applications, such as gaming and videoconferencing.
UPnP. If you want to use UPnP, keep the default setting, Enabled. Otherwise, select Disabled.
Allow Users to Configure. Select Enabled, if you want to be able to make manual changes to the Router while
using the UPnP feature. Otherwise, keep the default setting, Disabled.
Allow Users to Disable Internet Access. Select Enabled, if you want to be able to prohibit any and all Internet
connections. Otherwise, keep the default setting, Disabled.
Backup and Restore
Backup Configurations. To back up the Router's configuration settings, click this button and follow the on-
screen instructions.
Restore Configurations. To restore the Router's configuration settings, click this button and follow the on-
screen instructions. (You must have previously backed up the Router's configuration settings.)
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For more information, click Help.
Chapter 5: Configuring the Wireless-N Home Router
The Administration Tab - Management
41