Conventions Adopted In These Operating Instructions; Classification Of The Precautionary Notices; Other Notational Conventions; Safety Warnings - HellermannTyton Autotool 2000 CPK Manuel D'utilisation

Safety warnings

1 .9 Conventions adopted in these Operating
Instructions

1 .9 .1 Classification of the precautionary notices

Precautionary notices in these Operating Instructions
draw attention to hazards associated with use of the
device and indicate how they can be avoided.
The precautionary notices are subdivided into three
groups according to the severity of the potential hazard:
DANGER
Texts accompanied by the signal word "DANGER" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, will cause death or severe
injury.
WARNING
Texts accompanied by the signal word "WARNING" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, can cause death or serious
injury.
CAUTION
Texts accompanied by the signal word "CAUTION" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, can cause slight or serious
injury.

1 .9 .2 Other notational conventions

f Indicates an instruction
• Indicates an item in a bulleted list
; Indicates the result of an action
This text highlight is used for names of menus,
clickable on-screen buttons, pushbuttons and switches.
This text highlight is used for display messages.
à This text highlight is used for cross-references.
NOTE
Texts accompanied by the signal word "NOTE" indicate
situations which, in the event of non-compliance with the
appropriate precautions, can cause damage to the device
or the surroundings.
Texts accompanied by this symbol contain information about
environmental protection.
Texts accompanied by this symbol contain useful additional
information.
6
2 Safety warnings

2 .1 General power tool safety warnings

The safety warnings in this section contain general power
tool safety warnings to be set out verbatim in the Operating
Instructions as required by EN 60745. Consequently, some
instructions might not be relevant for the AT2000 CPK.
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all safety warnings and other instructions for
future reference. The term "power tool" in the
warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.

2 .1 .1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

2 .1 .2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
AT2000 CPK• Operating Instructions • 04-2015 • 106-29004