LaCimbali M26 Utilisation Et Installation page 55

C version / DT version without display
CAREFULLY PAY ATTENTION TO THE
SEQUENCE FOR ACTIVATING THE SWITCHES
(1) AND (1A).
1
1
Press the luminous main switch (1) into position
related indicator light switches on and the key also light up.
If the water level in the boiler is lower than the minimum
restored pressure in the manometer-pump.
During heating, if one of the coffee dispensing push buttons is pressed, the machine dispenses a coffee at the temperature
reached at the time.
Heating is completed when the boiler gauge indicator (19) remains stable in the P green area.
The machine is now ready to dispense coffee, steam and hot water.
button (9) and let the machine dispense coffee for a few seconds. Then press again the push button (9) to stop dispensing.
02_M26_UNICO_1817.indd 11
9
2
1A
ONLY AFTER
the
completed should you press the light switch that
activates the resistance (1A) into position
indicate light switches on and the heating phase begins.
Wait until the operating pressure (approx. 1.2 bar) appears
on the manometer (19).
At this point, the machine is ready for use.
(21) are at similar temperatures, press the coffee dispensing push
11 EN
19
21
1 1A
the related
P
03/05/2018 16:48:20