Moulinex i-Companion gourmet Mode D'emploi page 33

Your i-Companion gourmet appliance can operate
in 'connected' mode, and also in 'unconnected'
mode. It also has two operating modes: automatic
programme mode and manual mode.
• Automatic programme mode:
the speed, cooking temperature and cooking
time are pre-programmed to make soups, stews,
steamed dishes and pastries automatically.
• Manual mode:
you can personalise the settings for speed,
cooking temperature and cooking time as you
wish.
FITTING THE BOWL, ACCESSORIES AND LID
ASSEMBLY
• Before using your appliance for the first time,
clean all the parts (D, E, F, G) in warm soapy
water, except for the motor unit (A). Your bowl
(D) has a removable drive (D3) to make cleaning
easier.
• Make sure that all the packaging has been removed
before use, especially the protection between the
bowl (D) and the motor unit (A).
• Position the gasket (E4) on the gasket retainer
(E3) (see Fig. 1) and clip the assembly onto
the lid (E2) (see Fig. 2).
• Position the gasket (D4) on the shared drive
(D3). Lock the assembly to the bottom of the
bowl with the locking ring (D5) (see Fig. 3).
• Position the chosen accessory in the bowl:
- the accessories (F1, F2, F3, or F4) on the shared
drive at the bottom of the bowl (see Fig. 4.1),
- for steam cooking, the steam basket (F5) inside
the bowl, (see Fig. 4.3 ), taking care to first fill
the 0.7l basin with a liquid (water, sauce, etc.)
(see Fig. 4.2 ).
• Add the ingredients to the inside of the bowl or
steam basket.
• Position the lid on the bowl (D) by aligning the
two triangles (see Fig. 5), lock the lid without
pressing by turning it in the direction of the arrow
(see Fig. 6).
Position the steam regulator cap (E1) on the lid.
There are 2 possible positions:
The low setting allows a maximum
amount of condensation to be
released and therefore it is re-
commended to prepare dishes and
sauces with a better consistency
(risotto, creamy puddings, sauces, etc.).
The high setting allows a maximum
amount of heat and steam to build
up in the bowl for all types of steam
cooking (soups, etc.).
This setting also prevents splashing during
mixing.
• Position the bowl (D) on the motor unit (A)
until you hear a "click" (See Fig. 8).
• The appliance only starts up if the bowl and
the lid are correctly positioned and locked on
the motor unit.
In the event of incorrect positioning of the
bowl or incorrect locking of the lid (See
Fig. 10.1 and 10.2), the logo
flash when a function is activated.
27
EN
starts to