Adjusting The Fan Speed; Adjusting The Air Flow Direction; Setting The Timer; Setting The Current Time - Friedrich M09YJ Manuel D'installation

BASIC FUNCTIONS
12
Fan Only Mode
This mode only circulates the indoor air
without changing the room temperature. The
cooling lamp lights up in air circulation mode.
|
1
Press to turn on the power.
Press / to select the air circulation oper-
2
ation.
- E is displayed on the display screen.
g
3
Press to adjust the fan speed.

Adjusting the fan speed

g
1
Press repeatedly to adjust the fan
speed.
- Select 5 if you want natural air.
The fan speed adjusts automatically.
Remark Speed
High
Medium - High
Medium
Medium - Low
Low
Natural Wind

Adjusting the air flow direction

1
To adjust the direction of the air flow verti-
D
cally, press repeatedly and select the
desired direction.
I
- Select to adjust the direction of the air
flow automatically.
2
To adjust the direction of the air flow hori-
E
zontally, press
the desired direction.
J
- Select to adjust the direction of the
air flow automatically.
NOTE
!
• Adjusting the air flow direction horizon-
tally may not be supported, depending
on the model.
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts
to operate with the previously set direc-
tion of air flow, so the air deflector may
not match the icon displayed on the re-
mote control. When this occurs, press
D E
or to adjust the direction of the
air flow again.

Setting the timer

You can use the timer function to save energy
and to use the air conditioner more efficiently.

Setting the current time

Press p and hold it for longer than 3 sec-
1
onds.
- The AM/PM icon flickers at the bottom of
the display screen.
repeatedly and select