Interior Filter; Radio; Switch Panel; Heating, Ventilation, Air-Conditioner - Kärcher MC 250 Mode D'emploi

Masquer les pouces Voir aussi pour MC 250:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
7.2

Interior filter

Lock
1
Bar cover
2
Fine dust filter, filter class F9
3
The fresh air is drawn in through a fine dust filter at the driv-
er cabin (rear right).
7.3

Radio

The optionally available radio is locate in the ceiling con-
sole.
See the manufacturer's operating instructions for operat-
ing the radio.
7.4

Switch panel

The switch panel is located in the ceiling console.
Note
The indicator in the switch lights up when it is switched on.
Warning flasher system switch
1
Upper position: Off
Lower position: On
46
Lighting switch
2
Upper position: Driving light off
Central position: Parking light on
Lower position: Driving light on
Front working light switch
3
Upper position: Off
Lower position: On
Flashing beacon switch
4
Upper position: Off
Lower position: On
Switch for heatable outside mirror (option)
5
Heating / air-conditioner
6
Operation is described in a special chapter.
7.5

Heating, ventilation, air-conditioner

The control elements are located in the ceiling console.
Temperature controller for cooling / heating
1
Air-conditioner on / off
2
Note
The air-conditioner will not be activated until the blower
motor speed controller is at least at level 1.
Switch above: Air-conditioner on - indicator lights up
Switch below: Air-conditioner off
Controller for blower motor
3
1. Make sure you have a comfortable climate while in the
driver cabin. Adjust this using the control elements.
Ventilation nozzles
1
2. Adjust the ventilation nozzles draft-free. Press the ven-
tilation flap to open / close. Turn the ventilation flap to
change the direction of the airflow.
English

Publicité

Table des Matières
loading

Table des Matières