Door Removal And Installation; Door Latch; Grate Installation - Continental Fireplaces CDI-30N Instructions D'installation Et D'opération

4.3

DOOR REMOVAL AND INSTALLATION

To open the door, the safety screen and faceplate
must be removed to allow the door to be opened
or closed. Release the top and bottom door
latches, located at the right side of the door.
Reverse these steps to close the door. Ensure
the safety screen is installed correctly before
using appliance. NOTE: These spring latches
make up the spring relief system for the
appliance. Ensure they open freely and close
sealed.
NOTE: The protective wrap on plated parts is
best removed when the assembly is at room
temperature but this can be improved if the
assembly is warmed, using a hair dryer or
similar heat source.
4.4

GRATE INSTALLATION

A. Remove the 3 screws from the location shown
in the base of the fi rebox.
B. Secure the grate to the fi rebox base using the
3 screws removed.
13

DOOR LATCH

W415-1405 / A / 01.06.16
EN