emerio CAN-110357 Mode D'emploi page 6

Machine a bonbons
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 Tablespoons Sugar
1 Teaspoon of Cola Flavoring
Add the water and sugar into the pot. Mix in the gelatin and cola flavoring until dissolved and the mixture
becomes runny. Unplug the unit. Pour the mixture into your selected moulds and leave to set for approximately
15 minutes.
Fruit gummies
120ml of your chosen fruit juice, for example orange
3 Tablespoons Gelatin
3 Tablespoons Sugar
Add the juice and the sugar into the pot. Mix in the gelatin and continue stirring until runny. Unplug the unit.
Pour the mixture into your selected moulds and leave to set for approximately 15 minutes.
Vitamin gummies
3 tablespoons gelatin
120ml of your chosen fruit juice
2 Tablespoons honey (optional)
Vitamin of your choice (Vitamin C, multi vitamins, probiotics, magnesium, etc.)
Whisk together the juice, honey and gelatin into the pot. Continue to heat and stir until mixture is runny. Unplug
the unit. Remove the pot from the heating base and stir in your selected vitamins. Pour the mixture into your
selected moulds and leave to set for approximately 15 minutes.
Energy gel chews
4 packets gelatin
120ml energy drink
Vitamin of your choice (Vitamin C, multi vitamins, probiotics, magnesium, etc.)
Whisk together the energy drink and gelatin into the pot. Continue to heat and stir until mixture is runny. Unplug
the unit. Remove the pot from the heating base and stir in your selected vitamins per day you wish to use times
4. Pour the mixture into your selected moulds and leave to set for approximately 15 minutes.
CLEANING AND MAINTENANCE
1. Before cleaning your appliance, unplug it from the mains supply and allow it to cool down completely.
2. Never immerse any part of your appliance, the cord or plug in water or any other liquid.
3. Never use an abrasive sponge or cloth, as this may damage your unit.
4. Do not use coarse or abrasive cleaners or steel wool to clean the appliance.
5. Never place anyting other than the intended mix in the stirring pot.
6. Dispose of any remaining mixture by emptying it into a bag or rubbish receptacle. It is not recommended
that you pour the leftover mixture down the sink.
7. Lift the stirring pot out from the heating base and lift the four colored moulds out from the ice tray ring. Turn
the heating base anti-clockwise to unlock it from the ice tray ring. Lift the heating base and the plug out of
the ring. The heating base and cord should not be washed or immersed in water at all. If necessary, the
outside of the heating base can be wiped with a dry, non-abrasive cloth. Make sure no water gets inside of
the heating base.
8. Hand wash the moulds, stirring pot and the ice tray ring. Wash with warm soapy water and only use a non-
abrasive cloth, such as a soft sponge. Do not use scourers.
9. Dry parts thoroughly with a soft, non-abrasive cloth. Make sure the stirring pot and moulds are clean and
dry before next use.
10. Do not put any parts in a dishwasher for cleaning purpose.
- 5 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Can-110357.1

Table des Matières