Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
3.
Welding produces sparks and molten slag. A cooling bead can
eject chips or fragments of slag. Any of these can cause direct
harm to the eyes or skin of the user or bystanders.
4.
Erect protective screens or barriers to protect bystanders from the
flash and glare; warn others in the area not to watch the arc. Do not
strike a welding arc until all bystanders and you (the user) have
welding shields and/or helmets in place.
5.
Immediately replace a cracked or broken helmet or a scratched or
damaged lens filter to avoid damage to the eyes or face from arc
flash or ejected molten material.
6.
Do not allow the plasma torch to accidentally touch the ground clamp
or grounded work. An arc flash will result from contact and can injury
the unprepared user and bystanders. It can also damage the
plasma cutting machine.
7.
Do not handle hot metal or electrode stubs with bare hands.
Handling may result in a burn injury.
8.
Do not use the plasma cutting machine if personal movement is
confined or if there is a danger of falling.
9.
Keep all panels and covers securely in place when operating the
plasma cutting machine.
10. Insulate the ground clamp when not connected to a workpiece to
prevent contact with any metal object.
11. Do not operate the plasma cutting machine if the plasma torch or
welding cable is wet. Do not immerse them in water. These
components and the plasma cutting machine must be completely
dry before attempting to use them.
12. Do not point the plasma torch at any body part of yourself or at
anyone else.
13. Do not use a plasma cutting machine to thaw frozen pipes.
14. Insulate yourself from the work and the ground using dry insulation.
Make certain that the insulation is large enough to cover your full
area of physical contact.
15. Never dip the electrode in water for cooling.
16. When not welding, make certain that no part of the electrode circuit is
touching the workpiece or the ground. Accidental contact can cause
overheating and create a fire hazard.
Visit www.princessauto.com for more information
80A PROCUT 80 Plasma Cutter
8784480
7
Publicité
Table des Matières
