Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
degreasing or any spraying operations. The heat and light from
welding can react with the vapour and form irritating or potentially toxic
gases. Wait for the vapours to disperse.
5.
Consult the manufacturer's Safety Data Sheets (SDS) for
instructions and precautions about metals, consumables, coatings,
cleaners and degreasers.
5.1 Do not weld on coated metals such as galvanized, lead or
cadmium plated steel, unless the coating is removed from the
weld area. The coatings and any metals containing these
elements can give off toxic fumes during the welding process.
5.2 Do not weld, cut or heat lead, zinc, cadmium, mercury,
beryllium or similar metals without seeking professional advice
and inspection of the welding area's ventilation. These metals
produce extreme toxic fumes, which can cause discomfort,
illness and death.
5.3 Do not weld or cut near chlorinated solvents or in areas that
chlorinates solvents can enter. The heat or ultraviolet light of the
arc can separate chlorinated hydrocarbons into a toxic gas
(phosgene) that can poison or suffocate the user or bystanders.
COMPRESSED GAS CYLINDER PRECAUTIONS
WARNING! Improper handling or maintenance of compressed
gas cylinders and regulators can result in serious injury or
death. Do not use a cylinder or its contents for anything other
than its intended use.
1.
Do not attempt to mix gases or refill a gas cylinder. Exchange a
cylinder or have it refilled by a professional service.
2.
Do not deface or alter the name, number or other markings on a
cylinder. Do not rely on a cylinder's colour to identify the contents. Do
not connect a regulator to a cylinder that contains a gas that the
regulator was not designed to handle.
3.
Do not expose a cylinder to excessive heat, sparks, slag, flame or
any other heat source.
3.1 A cylinder exposed to temperatures above 130 °F will require
water spray cooling. This method may not be compatible with
the plasma cutting machine due to the hazard of electrocution.
4.
Do not expose a cylinder to electricity of any kind.
Visit www.princessauto.com for more information
80A PROCUT 80 Plasma Cutter
8784480
11
Publicité
Table des Matières
